So I ordered a pouring kettle directly from a Japanese shop. It was fun! As far as online shopping goes. It was a bit of a minefield navigating those address boxes but somehow, and for a mere, $20 bucks or so, it arrived here after 3 (!) days! Faster than UPS Ground, and even after that shipping charge, I saved about 30% off the typical US retail price. Oh, and about 500% off the Blue Bottle price. Blue Bottle being Blue Bottle.

 The kettle came with some instructions embodying decades of Japanese pour-over wisdom. I was pleased to discover that it basically aligned with the stuff I picked up through experience.

* Pour as closely and as gently to the grounds as possible.

Totally agree with this point. This is partly why you want to brew as close to full capacity as possible. Allows the spout to get closer to the coffee bed, allowing for less disruption, or something. Coffee just tastes better this way.

* Pour spirally.

Spreads that turbulence around.

* Always keep water in the dripper.

This one is important. You can accomplish it by pouring continuously, or pulse pouring while ensuring that there's always water in the dripper. I prefer the latter, and so does the person who wrote the instruction guide. Essentially, you should be pouring into *water* not onto the coffee bed directly. Water absorbs the turbulence and the whole process is more gentle. 

There are some other instructions, but the above points are the most important I think. 

  Ancillary points:

You can change extraction by changing pour speed, which is common sense I think. Slower pour leads to a different extraction, but pouring more slowly also, perhaps, means lower-temperature water. So you could get a technically "fuller" extraction that nonetheless doesn't have the density of flavor of a "weaker" or "lower" extraction.

Sadly, it'll be a while before I get to put this thing into action. LIDO grinder won't be shipping for another coupla' weeks.

It's okay. Pre-ground coffee isn't that bad. In fact, it's a test of one's palette. Coffee doesn't go stale as milk goes stale...it simply loses intensity (in the "short" term...within a month of roatsing). So I'm still getting great flavor from my coffee; I just have to pay closer attention. It's been an interesting experience. As far as coffee goes. 

Blog Category: 

Comments

Submitted by jbviau on
Have a link to the kettle? I wouldn't mind taking a look. What will you be pouring water into? IIRC you sold off a bunch of your gear a while back. Also, sorry to hear about the LIDO delay. Parts-related, no? I've been using mine for all non-espresso brewing for over 2 weeks now; honestly, don't see how you can beat it as a "portable" travel grinder except for the fact that it's not light, but even as a stand-alone home grinder it's much more than adequate.

Submitted by donnedonne on
Sure, it's pictured here: http://1.bp.blogspot.com/_umNguK95fBo/TFT8dHwiI2I/AAAAAAAAAO8/qIDsXnGm2_w/s200/Coava+-+pour+over.JPG I'll be using a Kalita, er, Tiamo wave. Love using ceramics, and Kalita for whatever reason doesn't make a small Kalita Wave in ceramic

Submitted by donnedonne on
Thanks intrepid. It's all relative though, right? :-) A lot of people think that any sort of pouring kettle is non-sense, and maybe that are some folks who don't believe fresh roasted makes a difference!

Submitted by Chamie on
...with all of your points, and that's definitely a nice looking kettle. I'm absolutely enchanted by swan-neck pouring kettles -- I love the way they look, and the ergonomics make sense. I've been brewing pourover coffee since the early 90s, using a basic plastic Melitta cone and a tea kettle. I like the results....but I think it's time for an upgrade.

Submitted by EricBNC on
<br>glad you like this kettle - I considered one like this as well as the Hario (did end up with one of those but gave it away to a friend with a ceramic top stove) before I stumbled into my Bonavita kettle - that one is as nice looking as any I have seen.

Pouring Kettle

| by

So I ordered a pouring kettle directly from a Japanese shop. It was fun! As far as online shopping goes. It was a bit of a minefield navigating those address boxes but somehow, and for a mere, $20 bucks or so, it arrived here after 3 (!) days! Faster than UPS Ground, and even after that shipping charge, I saved about 30% off the typical US retail price. Oh, and about 500% off the Blue Bottle price. Blue Bottle being Blue Bottle.

 The kettle came with some instructions embodying decades of Japanese pour-over wisdom. I was pleased to discover that it basically aligned with the stuff I picked up through experience.

* Pour as closely and as gently to the grounds as possible.

Totally agree with this point. This is partly why you want to brew as close to full capacity as possible. Allows the spout to get closer to the coffee bed, allowing for less disruption, or something. Coffee just tastes better this way.

* Pour spirally.

Spreads that turbulence around.

* Always keep water in the dripper.

This one is important. You can accomplish it by pouring continuously, or pulse pouring while ensuring that there's always water in the dripper. I prefer the latter, and so does the person who wrote the instruction guide. Essentially, you should be pouring into *water* not onto the coffee bed directly. Water absorbs the turbulence and the whole process is more gentle. 

There are some other instructions, but the above points are the most important I think. 

  Ancillary points:

You can change extraction by changing pour speed, which is common sense I think. Slower pour leads to a different extraction, but pouring more slowly also, perhaps, means lower-temperature water. So you could get a technically "fuller" extraction that nonetheless doesn't have the density of flavor of a "weaker" or "lower" extraction.

Sadly, it'll be a while before I get to put this thing into action. LIDO grinder won't be shipping for another coupla' weeks.

It's okay. Pre-ground coffee isn't that bad. In fact, it's a test of one's palette. Coffee doesn't go stale as milk goes stale...it simply loses intensity (in the "short" term...within a month of roatsing). So I'm still getting great flavor from my coffee; I just have to pay closer attention. It's been an interesting experience. As far as coffee goes. 

Category: BLOG

nice

April 20, 2012 | by EricBNC


glad you like this kettle - I considered one like this as well as the Hario (did end up with one of those but gave it away to a friend with a ceramic top stove) before I stumbled into my Bonavita kettle - that one is as nice looking as any I have seen.

Very nice looking kettle,

April 19, 2012 | by hoonchul@hotmail.com

Very nice looking kettle, how much was the kettle itself? I thought that was damn good deal for 20 bucks then I saw your post.

Totally agree

April 17, 2012 | by Chamie

...with all of your points, and that's definitely a nice looking kettle. I'm absolutely enchanted by swan-neck pouring kettles -- I love the way they look, and the ergonomics make sense. I've been brewing pourover coffee since the early 90s, using a basic plastic Melitta cone and a tea kettle. I like the results....but I think it's time for an upgrade.

Thanks intrepid. It's all

April 17, 2012 | by donnedonne

Thanks intrepid. It's all relative though, right? :-) A lot of people think that any sort of pouring kettle is non-sense, and maybe that are some folks who don't believe fresh roasted makes a difference!

Nice, it's a very nice

April 17, 2012 | by intrepid510

Nice, it's a very nice pouring kettle and seems like you have paired it well for a low-tech no nonsense brewing set-up.

I noticed that I was

April 16, 2012 | by donnedonne

I noticed that I was ambiguous in my wording above. The kettle wasn't 20 bucks, but the shipping was

Sure, it's pictured here:

April 16, 2012 | by donnedonne

Sure, it's pictured here: http://1.bp.blogspot.com/_umNguK95fBo/TFT8dHwiI2I/AAAAAAAAAO8/qIDsXnGm2_w/s200/Coava+-+pour+over.JPG I'll be using a Kalita, er, Tiamo wave. Love using ceramics, and Kalita for whatever reason doesn't make a small Kalita Wave in ceramic

Cool

April 16, 2012 | by jbviau

Have a link to the kettle? I wouldn't mind taking a look. What will you be pouring water into? IIRC you sold off a bunch of your gear a while back. Also, sorry to hear about the LIDO delay. Parts-related, no? I've been using mine for all non-espresso brewing for over 2 weeks now; honestly, don't see how you can beat it as a "portable" travel grinder except for the fact that it's not light, but even as a stand-alone home grinder it's much more than adequate.

Categories

  • http://coffeekind.com/sites/default/files/icon_blog_on.png

    BLOG

  • http://coffeekind.com/sites/default/files/icon_knowledge1_on.png

    KNOWLEDGE

  • http://coffeekind.com/sites/default/files/icon_news_on.png

    NEWS

  • http://coffeekind.com/sites/default/files/icon_guides_on_1.png

    BREWING GUIDES

  • http://coffeekind.com/sites/default/files/icon_buying_guides_on_1.png

    BUYING GUIDES

  • http://coffeekind.com/sites/default/files/drink_guide_1.png

    DRINK GUIDES

  • http://coffeekind.com/sites/default/files/recipehover.png

    RECIPES

  • http://coffeekind.com/sites/default/files/latest%20reviews.png

    LATEST REVIEWS